How do I reset Wi-Fi on my Doxie Go SE?

Resetting Wi-Fi restores the Wi-Fi system to its default settings, and is helpful for troubleshooting Wi-Fi issues. But, please note — it is not a solution for any other type of issue you may be having with your Doxie.

1. Turn on scanner and Wi-Fi. Make sure the LED shows a slow white flash.
   

   

2. Insert a paper clip in the reset hole on the back of Doxie and hold it down for about 10-15 seconds until the LED starts to repeat two quick white flashes.
   

   

3. Release the reset button.
4. When reset is complete, the LED will return to a slow white flash. The whole process takes about 90 seconds. Note: On rare occasions, the Wi-Fi module may turn off after reset is complete. That is, the LED returns to a solid green (300 dpi) or solid orange (600 dpi). Turn Wi-Fi back on back hitting the button on the back of Doxie. Wi-Fi is ready when the LED shows a slow white flash.

Note: Resetting Wi-Fi will revert the scanner back to the default name. You may need to turn your device's Wi-Fi off and on to see the scanner again.