Import Scans via Wi-Fi

To import scans via Wi-Fi to your computer:

1. Turn on Doxie. Press and hold down the power button for a moment.
   

   

2. Enable Wi-Fi. Turn on Wi-Fi by tapping the back button. Doxie's light quickly blinks white and turns to a slow white flash when Wi-Fi is ready.
   

   

   
   

   NOTE: The white LED should be blinking - if it's solid white, you've accidentally turned on an advanced mode. Tap the Wi-Fi button to turn it off, then tap it again to turn on Wi-Fi (don't hold down the Wi-Fi button, just tap).

3. ... then join Doxie's network. Join Doxie's direct network from the Wi-Fi menu on your computer's menu bar or task bar. If you've configured Doxie to connect to your local Wi-Fi network, join that network instead – you want to be on the same network as your Doxie.
   

   

4. Launch the Doxie App. You will see a pop up menu and a Wi-Fi symbol at the top right of the main window.
   

   

5. Click the Import button to start importing scans.

If you've joined Doxie's own network (versus a home or office network) and you were on another network previously, re-join that network when you're done with Doxie to get back online. (You can also configure Doxie to join your local network in the future.)

Once scans are imported, you can proceed to organize, staple, and save your scans. You can also just leave them in the Doxie app, until you're ready to do something more with them.